MOBILE OIL SERVICE UMFC 41/81

Technical Description:
The UMFC is a mobile off-line-filter unit with "Fluid-Control"-function, simplifying off-line-filtration and filling of reservoirs, selectively equipped with the “Interporvlies”-filter elements or with our well proven “Watersorp”-filter elements. For a representative conclusion about the prevailing condition of a fluid, a continuous measurement of the contamination classes and the saturation of the oil with water is provided between pump and filter unit. The output is displayed in contamination classes according to ISO 4406:99 and in percent (%) of saturation of the oil with water, additionally data may be read out and transfered to a standard PC via serial interface RS232. The unit UMFC is equipped with 4 separate operating modes. By entering of the desired contamination classes and/or desired water saturation an automated shutdown of the UMFC is effected when reaching threshold for contamination classes, for water saturation or for contamination classes and water saturation. As for a protection of the particle sensor, the unit is equipped with a temperature control function. For avoiding any damages, the sensor of the particle counter set CCT 01 is switched off, when reaching an oil temperature of over 122°F. The maximum allowable oil temperature of the system is up to 158°F, reaching this value causes an automated shutdown. All conditions are displayed via pilot lamps on the LCD-monitor.
Technical Data:
	UMFC 41 single phase AC motor	UMFC 81 three phase AC motor / pole changing
Volume flow	35,5 l/min	35,5 l/min	71 l/min
Max. working pressure	87 psi	145 psi
Viscosity	10 - 400 mm2/s	10 - 800 mm2/s	10-400 mm2/s
Electrical connection	230 V 50 Hz (1 phase)	230/400 V 50 Hz (3 phasen)	230/400 V 50 Hz (3 phasen)
Max. oil temperature	32...158°F particle measuring possible up to 122°F	32...158°F particle measuring possible up to 122°F