MOBILE SERVICE MKS 601 for Coolant- and Lubricant Systems
|
|
General Description:
|
This system simplyfies the draining of CNC-machine tanks containing
coolant and/or lubricant and removes contamination of the emulsion originated by machining.
An air pressure operated membrane pump feeds the equipment, for a mechanical cleaning of the
emulsion the medium is led through a filter unit to a reservoir of 600 l capacity. In this
reservoir, followed by an adequate span of time, the incorporated oil is separated from the
emulsion and is removed by systematic use of “Skimmer-Technology” and oil separation
mechanisms.
The System MKS 601 may also be applied as off-line filtration circuit, therefore the
fluid is conducted out of the machine tank through the mentioned filter unit, freed from
finest particles and led back to the machine circuit by a return line. The control block,
located upstream in the pressure line provides several intelligent possibilities, how to
run the system as for example the flow may be directed to the exit linewithout passing the
filter element. This is usefull and timesaving in the case of a coolant/lubricant change.
Another function is the activation of the low pressure cleaning gun intended for a cautious
and effective cleaning of the system. In this case the cleanig gun is supplied from the
machinery tank. The single components of the system MKS 600 are
easily and quickly to be dismounted.
|
Technical Data: |
| Function | MKS 601 |
| Net weight | appr. 270 kg |
| Dimensions | 1440 x 1116 x 1200 mm |
| Operation | by air pressure |
| Reservoir volume | 600 l |
| Extraction of other fluids | Yes |
| Extraction of chips | max. grain size 6 mm pilot filter suggested |
| Separation of other fluids | separation tank |
| Solid particle separation | filter fineness from 1 µm to 25 µm |
| Cleaning of the machine | hand cleaning gun up to 6 bar |