|
Pressure Filter, manifold mounted | MF 30, MFO 30 |
 |
 |
|
|
Description:
Pressure filter of the series MF 30 and MFO 30 are suitable for a working pressure up to 160 bar.
The pressure peaks are absorbed by a sufficient margin of safety. The filters are flange mounted to the hydraulic system.
The filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow direction is from outside to inside.
Filter elements are available down to 4 µm(c).
INTERNORMEN-Filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt retaining capacity and a long service life.
INTERNORMEN-Filter are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils.
INTERNORMEN-Filter elements are available up to a pressure difference resistance of ∆p 160 bar and a rupture strength of ∆p 250 bar.
|
 |
Instruction manual |
| Technical data: |
|
|
|
| temperature range: |
- 10 °C to + 80 °C (for a short time + 100 °C) |
| operating medium: |
mineral oil, other media on request |
| max. operating pressure: |
160 bar |
| test pressure: |
208 bar |
| connection system |
manifold mounted |
| housing material: |
Al; C-steel |
| sealing material: |
Nitrile (NBR) or Viton (FPM),
other materials on request |
| installation position: |
vertical |
| volume tank: |
0,1 l |
|
|
|
|
|
|
Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3.
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no. 34279-4).
|
|
Data Sheet |
|
Broschure |
 |
Clogging Indicator: |
|
visual-electrical AE
visual AOR/AOC
electronical VS1
electronical VS2
|
|
|
产 品 
