|
Stainless steel-pressure filter | EHP 60-90 |
 |
 |
|
|
Description:
The pressure filters of the series EHP are suitable for a working pressure up to 10150 respectively 20300 PSI.
The pressure peaks are absorbed by a sufficient margin of safety. The EHP-filter is in-line mounted
The filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow direction is from outside to inside. Filter elements are available down to a filter fineness of 1μm.
INTERNORMEN-Filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt-retaining capacity and a long service life.
INTERNORMEN-Filter are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils.
INTERNORMEN-Filter elements are available up to a pressure difference resistance of Δp 2320 PSI and a rupture strength of Δp 3625 PSI.
|
 |
Instruction manual |
| Technical data: |
|
|
|
| temperature range: |
+14°F to +176°F (for a short time +212°F) |
| operating medium: |
mineral oil, other media on request |
| max. operating pressure: |
10150 PSI / 20300 PSI |
| test pressure: |
14500 PSI / 29000 PSI |
| connection system |
thread connection |
| housing material: |
EN10088-3 - 1.4418 + QT900 |
| sealing material: |
Nitrile (NBR) or Viton (FPM),
other materials on request |
| installation position: |
vertical |
|
|
|
|
|
|
|
|
Pressure stage 700: Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluidgroup 2), Article 3, Para 3.
Pressure stage 1400: Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluidgroup 2), Article 3, Para 1.1.b) Category I (Modul A)
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no.34279-4).
|
|
Data Sheet |
|
Brochure |
|
|
|
|
|
|
|
|
