Description:

In-line filters of the type LF 63 are suitable for a working pressure up to 363 PSI.
Pressure peaks are absorbed with a sufficient margin of safety.
The filter is mounted in such a way that inlet and outlet are on the same level. It can be used as suction filter, pressure filter and return-line filter. The filter element consist of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow direction is from outside to the inside.
The particles are hold back on the outside. For cleaning (see special leaflet 21070-4) the mesh element respectively to change the glass fiber element remove the cover and take out the element.
Filter finer than 40 μm should use throw-away elements made of paper or Interpor fleece (glass fibre). Filter elements as fine as 5 μm(c) are available; finer filter elements on request.
INTERNORMEN-Filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt retaining capacity and a long service life.
INTERNORMEN-Filter are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils
Approvals according to TÜV, and the major „Shipyard Classification Societies“ D.N.V.; B.V.; G.L.; L.R.S.; R.I.N.A.; A.B.S. and others are possible.
The internal valve is integrated in the filter cover.
After reaching the opening pressure the by-pass valve causes that an unfiltered partial flow passes the filter.

visual AOR/AOC

visual-electrical AE

electical VS1

electrical VS2