|
Partial flow filter | NF 1000 |
 |
 |
| Description: The partial flow filter NF is foreseen for the fine filtration of hydraulic and lubrication circuits additionally to the main filter.
The big filtration area in comparison to the nominal size is the premise for a high dirt-retaining capacity even in case of small filterfineness.
Filter elements as fine as 5 μm(c) are available; finer filter elements on request.
To protect the filter elements and the filter housing equipment with by-pass valves is foreseen. Element change without tools is possible. After release of the straining screw and removal of the cover the elements are accessible and could be changed. The filter elements were delivered completely inclusive seals. Cleaning of the elements not possible therefore the user should have enough spare elements on stock.
  |  | Instruction manual | | Technical Data: | | | | | temperature range: | +14°F to +176°F (for a short time +212°F) | | operating medium: | mineral oil, other media on request | | max. operating pressure: | 232 PSI | | test pressure: | 305 PSI | | connection system: | SAE-flange connection 3000 PSI | | housing material: | aluminium forging alloy | | sealing material: | Nitrile (NBR) or Viton (FPM), | | other materials on request | | installation-position: | vertical | | measure connection: | ¼ BSPP
| | evacuation -or bleeder connection: | ½ BSPP
| | volume tank: | 3.0 Gal
| | | | | | | | |
Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3.
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no. 34279-4).
| | Data Sheet | | Brochure |  | Clogging Indicator: | | visual OP visual-electrical OE visual-electrical AE electrical VS1 electrical VS2 Â | |
|
