|
|
Description:
The filter element consists of a star-shaped pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps.
INTERNORMEN-Filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirtretaining capacity and a long service life.
The AS-filters are horizotally or vertically mounted to the reservoir and connected directly to the suction-line.
Due to its practical design the suction filter is easy to service. When releasing the filter lid a plate valve closes the suction-inlet of the filter and prevents the return flow of dirt oil to the reservoir, respectively when mounted horizontally the flow out of the reservoir is prevented.
After the servicing respectively after changing the element the filter is again ready for operation.
According to the operating condition the filter could be equiped with different accessories (clogging indicators, counter flange etc.).
|
 |
Instruction manual |
| Technical data: |
|
|
|
| temperatur range: |
- 10 °C to + 80 °C (for a short time + 100 °C) |
| connection system: |
SAE-flange connection 3000 PSI |
| housing material: |
G-AlSi10Mg wa DIN 1725 (3.2381.61) |
| sealing material: |
Nitrile (NBR) or Viton (FPM),
other materials on request |
| usable for following fluids: |
petroleum-based fluids, lubrication fluids |
| HW-emulsions and synthetic hydraulic fluids: |
on request |
| volume tank: |
6,3 l |
| installation position: |
optional |
|
|
|
|
|
|
Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3.
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no. 34279-4).
|
|
Data Sheet |
|
Brochure |
 |
Clogging Indicator: |
|
visual O1
electrical E4.-0.25
|
|
|
