Home Imprint Sitemap Contact Addresses
Deutsch (Deutschland)English (United Kingdom)American EnglishFrench (Fr)Español(Spanish Formal International)Russian(RU)Chinese

Upcoming fairs

07.09.2010 - 10.09.2010
SMM 2010
07.09.2010 - 09.09.2010
UGOL & MINING 2010
21.09.2010 - 25.09.2010
HUSUM WindEnergy 2010
pressure filter, change-over | HDD 601-1351 Print E-mail

pressure filter, change-over - HDD 601-1351

Description:

Duplex pressure filters with change-over valve type HDD are suitable for a working pressure up to 315 bar.
Pressure peaks can be absorbed with a sufficient margin of safety.
Duplex filters can be maintained without interruption. The upper part has a three-way-change-over valve which allows to changeover the flow from the dirty filter-side to the clean filter-side without interrupting the operation. The change-over procedure does not lead to a reduction of area.
The change-over can be done easily by opening of the changeover valve.
The mini-measuring connections on each filter-side allow the measuring of the pressure drop through the filter element, as well as at the pressure discharge of the tube plug during the maintenance.
Filter elements are available down to a filter fineness of 4 µm(c).
INTERNORMEN-Filter elements consist of filter materials with a high intrinsic stability, an excellent particle retention, respectively a high dirt holding capacity and provide a long service life.
INTERNORMEN-Filters can be used for mineral oil based fluids, HW-emulsions, water glycols, most synthetic hydraulic fluids and lubrication fluids.
The internal valves are integrated into the centering pivot for the filter element.
After reaching the opening pressure the by-pass valve causes that an unfiltered partial flow passes the filter. With the reverse valve a protection of the filter element is given when having a reverse flow inside the filter. The reverse flow will not be filtered.


folder_greyInstruction manual
Technical data:
temperature range:- 10 °C to + 80 °C (for a short time + 100 °C)
operating medium:mineral oil, other media on request
max. operating pressure:315 bar
test pressure:410 bar
connection system:SAE-flange 6000 PSI (standard),
AVIT-flange 320 bar (special design)
housing material:EN-GJS-400-18-LT; C-steel
sealing material:Nitrile (NBR) or Viton (FPM),
other materials on request
installation position:vertical
air bleeding and mini-measuring connection:G ¼
Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3.
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no. 34279-4).
folder_greyData Sheet
folder_greyBrochure
folder_manClogging Indicator:

visual AOR/AOC

visual-electrical AE

electronical VS1

electronical VS2