| Pressure Filter |
|
|
|
Description:
The pressure filters of the series HP 31 are suitable for a working pressure up to 420 bar.
The pressure peaks are absorbed by a sufficient margin of safety. The HP-filter is in-line mounted.
The filter element consists of star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow direction is from outside to the inside. Filter elements are available down to 4 μm(c).
INTERNORMEN-Filter elements are known as elements with a high intrinsic stability and an excellent filtration capability, a high dirt retaining capacity and a long service life.
INTERNORMEN-Filter are suitable for all petroleum based fluids, HW-emulsions, most synthetic hydraulic fluids and lubrication oils.
INTERNORMEN-Filter elements are available up to a pressure difference resistance of ∆p 160 bar and a rupture strength of ∆p 250 bar.
The internal valves are integrated into the centering pivot for the filter element.
After reaching the opening pressure the by-pass valve causes that an unfiltered partial flow passes the filter.
|
 |
Instruction manual |
| Technical data: |
|
|
|
| temperature range: |
- 10 °C to + 80 °C (for a short time + 100 °C) |
| operating medium: |
mineral oil, other media on request |
| max. operating pressure: |
420 bar |
| test pressure: |
546 bar |
| connection system |
thread according to ISO 228 |
| housing material: |
C-steel |
| sealing material: |
Nitrile (NBR) or Viton (FPM),
other materials on request |
| installation position: |
vertical |
| volume tank: |
0,1 l |
|
|
|
|
|
|
Classified under the Pressure Equipment Directive 97/23/EC for mineral oil (fluid group 2), Article 3, Para. 3.
Classified under ATEX Directive 94/9/EC according to specific application (see questionnaire sheet-no. 34279-4).
|
|
Data Sheet |
|
Brochure: |
 |
Clogging Indicator: |
|
visual-electrical AE
visual AOR/AOC
electronical VS1
electronical VS2
|
| |
|
